Simple Steps To Flash Any Dead Android Phone On PC

Simple Steps To Flash Any Dead Android Phone On PC

This guide is to teach you how to Install Official Stock Rom in any android phone OR How to get your Bricked phone back to normal working condition. Sometimes due to installation of custom rom that are not meant for your device you often end up bricking your device i.e Your phone doesn’t starts and even charge which ultimately is a brick or Boot Loop in which it keeps restarting but you can get back to normal easily by restoring your data for flashing rom through CWM but sometimes you can’t even goto recovery mode so This isn’t the end of your phone. Today I’m posting this about how to unbrick your phone, you can even use this method to install stock rom. We are going to use SP Flash Tool also known as Smart Phone Flash tool.

Tools & Software Required:

  1. SP Flash tool
  2. Android Stock ROM 
  3. MTK USB Driver (Steps to installation)
  4. PC or Laptop
  5. Dead MTK Phone
  6. USB cable

Steps to Fix/Unbrick Dead Android (MTK) Phone

***Your PC should be running on 32 bit irrespective of Window version.

SP Flash tool has 4 Dropdown, Its meaning & How to use:

a- MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.

b- Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)

c- Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)

1- Install MTK driver.

2- Download the tool.

3- Unzip it and double click on Flash_tool.exe.

4- It will launch the tool.

5- Download Android stock ROM, unzip it.

6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).

7- Click on Download.

8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.

9- Flashing starts and when completed, Download OK will appear.

 

Leave a Comment